Interfacial architecting of organic-inorganic hybrid toward mechanically reinforced, fire-resistant and smoke-suppressed polyurethane composites.

Polyurethane (PU) composites integrated with outstanding fire retardancy, smoke suppression as well as ameliorated mechanical property is attractive, but remains a challenge. Here, we demonstrate the interfacial architecting of organic-inorganic hybrid (ACAPP) by reacting renewable chitooligosaccharide (COS) with ammonium polyphosphate (APP) and ammonium octamolybdate (AOM) via a one-pot, facile and eco-friendly approach. The ACAPP with multiple hydroxyl groups shows good compatibility and strong interfacial adhesion force with PU matrix due to the abundant covalent cross-linking points and hydrogen bonds networks. The incorporation of 15 wt% ACAPP enables the resultant PU composite to achieve a V-0 rating, a limiting oxygen index of 26.1%, 31.1% and 44.8% reduction in total heat release and total smoke production, respectively, far outdistancing conventional APP. The suppressed fire hazards mainly benefits from the synergy catalytic carbonization effect of ACAPP in condensed phase. Moreover, ACAPP reinforces the tensile strength of PU whilst retaining the decent ultimate elongation. This work may offer a referable exemplification for constructing green flame-retardant to balance high fire safety and mechanical properties.

Preparation of fluorine-free superhydrophobic and wear-resistant cotton fabric with a UV curing reaction for self-cleaning and oil/water separation.

A durable superhydrophobic, self-cleaning cotton fabric prepared with UV curing was prepared by a simple method and used for oil/water separation. Firstly, sulfhydryl silica nanoparticles on the fabric surface were prepared by the Stöber reaction (SiO2-SH@cotton). Then, the side chain hydroxyl terminated PDMS was reacted with isocyanate to form an isocyanate terminated prepolymer. The prepolymer terminated by HEMA (vinyl-terminated PDMS (PIH)) was sprayed on the fabric surface, and then the superhydrophobic coating (SiO2-S-PIH@cotton) was formed using UV curing. A series of characterization methods were used to demonstrate the properties of the modified cotton fabric. When the weight gain after PIH spraying was 1.8 wt%, the fabric reaches an optimal state (water contact angle (WCA) of 153° and a sliding angle of 7°). When used in an oil-water separation test, the highest separation efficiency reached 99.1%. In particular, the as-prepared fabric has excellent wear resistance. Compared with that before spraying, the superhydrophobicity of the as-prepared fabric has no obvious decrease after 300 cycles under 200 g of weight or after 100 cycles under 500 g of circular friction. This indicated that surface sprayed polymers have two functions: providing low surface tension and protecting the rough surface formed by silica particles. This process was time-saving, energy-saving, protected the environment, had a low material cost and a strong performance stability. It is hoped that this fabric can be used in the large-scale industrialization of oil-water separation.